Frozen-Area Pin
REE002-R handles the ice-pin role for cold display placement, where label angle and position need to be controlled near the shelf edge.
Frozen-area ESL attachment
REE002-R Shelf Label Holder Fit Check
Use REE002-R when a frozen-area display needs a transparent PC ice pin, adapter planning, and waterproof-box coordination from a shelf label holder line built for ESL installation. The same checklist helps teams decide when a shelf edge label holder must be matched with a rail, clip, peg, or box accessory.
ModelRef: REE002-R
UseIce pin for frozen area
MaterialTransparent PC
Frozen-area fit gate
Check the Holder, Adapter, and Box Together
REE002-R is not just a small transparent pin. Its size, material, adjustable angle, and accessory pairing decide whether it fits the intended frozen-area display.
| Reference | REE002-R |
|---|---|
| Application | Ice pin for frozen-area electronic shelf label placement. |
| Dimensions | Depth 110mm; pin width 11mm. |
| Material | Transparent PC for a clear holder profile around the display edge. |
| Adjustment | Adjustable angle for aligning label visibility with shelf and display position. |
| Accessory match | Works with adapter or waterproof box; check the combined setup rather than the pin alone. |
| Custom work | Design support and 3D drawing prototyping are available for project-specific ESL fittings. |
Attachment role map
Place REE002-R Within the Full ESL Fixture Set
A frozen-area label installation often combines several small fittings. Separate their roles before selecting quantities or asking for custom drawings.
Adapter Connection
The pin should be reviewed with the adapter arrangement so the ESL display sits in the correct orientation and does not conflict with the fixture.
Waterproof Box Pairing
When a waterproof box is part of the installation, confirm the box, holder, and display model together before finalizing the accessory list.
Compatibility boundary
Three Checks Before You Treat Holders as Interchangeable
ESL accessories often look simple, but compatibility depends on brand, shelf structure, and installation position. A short fit check prevents a small holder from becoming a rollout delay.
ESL Brand and Model
Send the display brand, model, and size when the holder needs to work with an existing ESL system.
Shelf or Fixture Material
Wood, glass, wire, peg, rail, and hanging-board setups can need different holder families.
Cold-Area Installation
Confirm whether the project needs a frozen-area ice pin, waterproof box, or both in the same placement.
Related ESL accessories
Other Holders to Compare by Mounting Role
Use these same-site accessory pages when an ESL rollout needs rails, clip holders, or peg hooks alongside frozen-area holders.
Code 200025 Rail Holder
An ESL rail label holder option for shelf-edge layouts that rely on rail mounting rather than a frozen-area pin.
Open product page
REE003A-H001 Clip Holder
A clip holder with adapter for projects that need a different attachment point from the REE002-R ice pin.
Open product page
REE-S6-H001 Peg Holder
A peg T-hook holder for retail displays where ESL placement follows peg merchandising rather than standard shelf rails.
Open product pageTechnical reading
Three Notes for Cleaner ESL Accessory Selection
These reads help teams separate adapter types, match accessories to store fixtures, and read compatibility language with the right level of caution.
Adapters, rails, and clamp holders
Compare accessory roles so a frozen-area pin is not confused with a rail or clamp-based holder.
Read articleShelves, pegs, hanging boards, and stands
Map ESL accessories to common retail placements before preparing a rollout bill of materials.
Read articleCompatibility language in ESL fittings
Read brand and accessory compatibility claims without assuming every display, rail, or box setup is identical.
Read articleInstallation RFQ checklist
Information to Prepare for a Holder Quote
Small ESL fittings are easier to quote when the installation environment is clear. Send the display, shelf, and accessory context together.
ESL display
Brand, model, and size
Share the ESL brand and display size so the holder can be reviewed against the actual device.
Fixture context
Shelf, rail, peg, or box
Identify whether the placement uses a shelf edge, rail, peg hook, hanging board, adapter, waterproof box, or mixed setup.
Project detail
Quantity and custom notes
Include target quantity, drawing needs, custom design requirements, destination, and preferred shipping method.
For custom projects, send available shelf photos or drawings with the first inquiry so the holder family and accessory pairing can be checked together.
FAQ
Common Questions About REE002-R Holder Orders
What is REE002-R used for?
REE002-R is an ice pin for frozen-area ESL placement. It is designed for retail shelf label setups that need a holder near cold or frozen displays.
What dimensions should be checked before ordering?
Check the 110mm depth and 11mm pin width against the intended shelf, adapter, and waterproof box arrangement.
What material and color are listed for this holder?
The holder is made from PC material and listed in transparent color.
Does the holder work alone or with other ESL accessories?
REE002-R works with an adapter or waterproof box, so the full installation setup should be checked together.
Can the viewing angle be adjusted?
The product details include an adjustable angle, which helps align label visibility with the shelf or display position.
What information should be sent for a custom ESL holder inquiry?
Share the ESL brand and model, shelf material, installation position, waterproof box or adapter needs, quantity, and any drawing or custom design requirements.
