Meethope Code 200025 ESL Rail Label Holder
Adhesive ESL holder for flat shelves, supporting retail display solutions with secure mounting for Electronic Shelf Labels from Hanshow and Pricer.
View productMeethope Code MEE1919 is an ESL rail label holder made for Hanshow Stellar and Pricer SmartTag labels on 30 mm C-channel shelving, with a flexible flip-up hinge and a slot for a personalized color strip. When a shelf-edge program gets underway, retail teams usually compare electronic shelf Label table stand suppliers first and then narrow the shortlist to the electronic shelf Label table stand manufacturers who can also cover tooling, 3D prototyping and repeat production runs.
Meethope Code MEE1919 is an ESL rail label holder made for Hanshow and Pricer electronic shelf labels on 30 mm C-Channel shelving. It clips to the rail that already runs along the shelf edge, so an ESL display can be added without changing the shelf itself.
The two features that decide whether the holder works on a given shelf are the hinge and the rail profile. The flexible flip-up hinge lets the label face lift away from the shelf edge, and the holder is shaped for the C-Channel groove rather than for a flat shelf edge.
Retail teams comparing electronic shelf label table stand suppliers need the same evidence from every one of them. Ask for these six items before a quotation is compared.
Ask which party owns the tooling for the holder profile and the adapters. A supplier that owns it can change the profile; one that does not has to go back to the moulder.
A named ESL size range is verifiable. The MEE1919 holder is stated for Hanshow Stellar and Pricer SmartTag labels between 1.54'' and 4.2''.
Ask how custom designs are handled and how long a sample takes. The supplier states custom designs with 3D prototyping are available.
The holder length is customized and the colour is transparent or customized, so the quotation has to confirm the length and colour of each line.
Angle blocks, rail end caps and promo holders are separate part numbers. Ask whether they come from the same supplier and the same lead time.
Ask for the production route that will be used and whether it is repeatable across store rollouts, not only for the first sample.
Most failures on a store rollout are fitment failures, not label failures. They come back to the same four causes.
A holder modelled for a 30 mm C-Channel does not seat on a flat or Tegometall edge. The rail profile has to be identified before the holder part number is chosen.
MEE1919 is stated for labels from 1.54'' to 4.2''. A larger label needs a different holder rather than a forced fit.
The flip-up hinge moves whenever the label face is lifted. Repeated lifting puts the load on the hinge, which is why the hinge is the part that eventually limits holder life.
Length is customized, so a length that was never confirmed against the shelf bay comes back as a holder that cannot be clipped end to end.
The published specification block for this holder, as stated on the product page.
| Item | Detail |
|---|---|
| Product | Meethope Code MEE1919 ESL Rail Label Holder |
| Function | ESL rail label holder for Hanshow / Pricer electronic shelf labels, working with a C-Channel 30 mm shelf and a flexible flip-up hinge |
| ESL manufacturer | Hanshow Stellar / Pricer SmartTag |
| ESL size | 1.54'' - 4.2'' |
| Material | PVC |
| Colour | Transparent / customized |
| Length | Customized |
| Angle block | 25° / 45°, part Z-ANGLE-001 |
| Rail end cap | Part REE-M001 |
| Promo holder | Part MEE1805, size 42×80 mm |
| Colour strip | Slot for inserting a personalized color strip |
Note: the product page's specification block prints the model as MEE1903, which does not match the product code MEE1919 used in the page title, breadcrumb and image alt text. The mismatch is reproduced here rather than resolved - confirm the model code you are ordering against your quotation. Price, MOQ, stock and lead time are not published for this holder.
The holder is a customized part, so the variants have to be pinned down line by line before a store rollout is ordered.
Two fields are open on this holder: length and colour. Colour can be supplied transparent or customized, and length is quoted per shelf bay rather than taken from a fixed list. Custom designs and 3D prototyping are stated as available, which is what allows the holder to be matched to a non-standard rail.
Accessories are separate part numbers and are ordered alongside the holder, not instead of it. That matters for store rollouts: the angle block or end cap has to be confirmed at the same time as the holder, otherwise the shelves arrive with holders that cannot be finished.
Where several store formats are involved, keep one part number per variant and record the rail profile against it, so a reorder does not depend on who placed the original order.
Send the same pack to each supplier so the quotations can be compared on the same basis.
The rail the holder clips to. For this holder that is a C-Channel 30 mm shelf edge.
The label the holder must carry. This holder is stated for Hanshow Stellar and Pricer SmartTag.
The label size, which has to sit inside the 1.54'' - 4.2'' range this holder covers.
The holder length per shelf bay, since length is customized rather than fixed.
Transparent or a specified colour, confirmed per line.
Which of the angle block, rail end cap and promo holder are needed, and in what quantity.
How many stores and how many bays per store, so the quotation covers the rollout rather than a sample.
The supplier's published route for this is the product page quotation request. The page does not publish price, MOQ or lead time, so all three have to come back in the quotation.
Send the shelf edge profile, ESL brand and size, and the length you need per bay. The supplier confirms the holder variant, the accessories and the quotation.
The MEE1919 is made for Hanshow Stellar and Pricer SmartTag labels and mounts on 30 mm C-channel shelving.
The holder uses a flexible flip-up hinge, and the linked guide explains how that movement affects the shelf edge when a restocking cart or contact presses on the rail.
A slot takes a replaceable colour strip, so a store can colour-code the shelf edge alongside the electronic label.
It is built for 30 mm C-channel shelving, and the linked guide notes that a 30 mm C-channel is a specific groove rather than a universal size, so check the existing rail profile before ordering.
The related range covers 200025, an adhesive holder for flat shelves, MEE1806 for Tegometall shelves, and MEE1807, another rail holder for Hanshow Stellar and Pricer labels.
Send the shelf profile, the electronic label model and the required length through the product page or the contact form for a quotation on the exact configuration.